PREPARE YOUR SELF FOR ONLINE EXAM & INTERVIEW

CHANGE YOUR PROXY

CHANGE YOUR PROXY 

Use PD Proxy & Multi Proxy

1.PD Proxy

http://www.pdproxy.com/download.htm

2.MULTI Proxy

+  

 http://multiproxy.org/downloads.htm 

http://www.multiproxy.org/mproxy12.zip 

Remove Virus Entry’s From Windows Registry

Remove Virus Entry’s From Windows Registry

Virus ~~~ oh how i hate them. Virus harm your PC a lot. Some virus just send sensitive information while others just harm your pc and change the way it functions . In the world there are billions and billions and billions of viruses. there is no end to this list of viruses. These viruses even after removing them leave a scar on your computer~~~ Virus was here. Well not like this but in your registry.The Windows Registry is where nearly all configuration settings are stored in Windows. Now if these settings are changed by the virus files the system will start behaving Abnormally.

To change the registry data needs to run Microsoft Registry Editor - RegEdit.exe. You can click the Start Button, then select Run… item. When the Run Window will appear, then type ‘RegEdit’ into Open: textbox and click OK button.

You might be unable to RegEdit, because the virus blocks the doorway. In this case, you need to bring up your Windows in Safe Mode to run the RegEdit. Sometimes, you need to login the Administrator account. Therefore, make sure you know your Administrator account’s password when you own the new computer.

Microsoft System Configuration Utility MSConfig.exe keeps entries of Start-Up programs. Besides that, System Registry has Run, RunOnce and RunOnceEx entry nodes to manage which program can run while Windows is starting.

First, you should check any starting programs inside the HEKY_LOCAL_MACHINE.

Go down to the node in HEKY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion, then look for program entry inside the Run, RunOnce and RunOnceEX. If you find something you don’t know, then you type the program name .exe name into the following Search box to find out what’s that. If the .exe name is the virus or spyware, then you can delete it.

It’s same that you need to check any starting program inside the HEKY_CURRENT_USER.

Go down to the node in HEKY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion, then look for unwanted .exe programs inside the Run, RunOnce and RunOnceEX. If you find something, then delete them.



Before Doing all this please backup your registry ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Cause if you do it all wrong you can get a system that dosent Boot


Backing up the Registry – Three methods
Method 1: Using System Restore

One way to backup the registry is to create a System Restore snapshot. System Restore returns your computer to a previous snapshot without losing recent personal information, such as documents, history lists, favorites, or e-mail. It monitors the computer and many applications for changes and creates restore points. You restore these snapshots when your configuration isn’t working. This method is unreliable in case you want to rollback the registry changes made a longtime ago, in which case the System Restore might have purged that particular restore point – due to space constraints or due to a recent system restore point or even a Restore point corruption. Please remember, System Restore points get deleted for many reasons, making it unreliable, especially in the long run.

For more help, see Creating a System Restore point and Using System Restore to Undo Changes if Problems Occur for Windows XP PCs. If you’re using Windows Vista or Windows 7, see How to create a System Restore point in Windows Vista and Windows 7.
Method 2: Backing up the selected branch of the registry by exporting

This method is preferred if you’re making changes to a specific branch of the registry. To backup a selected key in the registry, use these steps:
Click Start, and then click Run.
In the Open box, type regedit.exe, and then click OK
Locate and then click the key that contains the value that you want to edit
Right-click on the key and choose Export.
In the Save in box, select a location where you want to save the Registration Entries (.reg)
In the File name box, type a file name, and then click Save.

Backing up a selected branch of the registry…

Now that you’ve created a Registry backup for that particular key. Save the REG file in a safer location in case you want to undo the registry changes made. You can restore the settings by just double-clicking the REG file. It automatically merges the contents to the Registry.
Method 2(a) : Export Registry Keys Using Console Registry Tool

You can use the Console Registry Tool for Windows (Reg.exe) to edit the registry. For help with the Reg.exe tool, type reg /? at the Command Prompt, and then click OK.

For example, to export the key [HKEY_CURRENT_USER\Software\IOLO] and it’s sub-keys, try this from Command Prompt:

REG EXPORT HKCU\Software\IOLO D:\IOLO.REG

To view the REG contents type notepad D:\iolo.reg in Start, Run dialog. Console Registry Tool is extremely handy if you want to automate the backup task using scripts.

How to Hack Softwares to use them Forever

Here i will show you that "How to Hack Softwares to use them Forever ?" . That really a useful article,because in our daily life we need thousand of softwares today,which of most are highly paid..So how to use them Freely for whole Like ??

Most of us are familiar with many softwares that run only for a specified period of time in the trial mode.Once the trial period is expired these softwares stop functioning and demand for a purchase.But there is a way to run the softwares and make them function beyond the trial period. Isn’t this interesting?

Before I tell you how to hack the software and make it run in the trial mode forever, we have to understand the functioning of these softwares.I’ll try to explain this in brief.Because Purpose if ICA is 1st to clear your basics.So,When these softwares are installed for the first time, they make an entry into the Windows Registry with the details such as Installed Date and Time, installed path etc.After installation every time you run the software, it compares the current system date and time with the installed date and time.So, with this it can make out whether the trial period is expired or not.

So with this being the case, just manually changing the system date to an earlier date will not solve the problem.For this purpose there is a small Tool known as RunAsDate.

RunAsDate is a small utility that allows you to run a program in the date and time that you specify. This utility doesn’t change the current system date, but it only injects the date/time that you specify into the desired application.

Download RunAsDate v1.10

Intercepts the kernel API calls that returns the current date and time (GetSystemTime, GetLocalTime, GetSystemTimeAsFileTime), and replaces the current date/time with the date/time that you specify.It works with Windows 2000, XP, 2003 and Vista.

NOTE: FOLLOW THESE TIPS CAREFULLY
You have to follow these tips carefully to successfully hack a software and make it run in it’s trial mode forever.
1. Note down the date and time, when you install the software for the first time.
2. Once the trial period expires, you must always run the software using RunAsDate .
3. After the trial period is expired, do not run the software(program) directly.If you run the software directly even once, this hack may no longer work.
4. It is better and safe to inject the date of the last day in the trial period.

For example, if the trial period expires on oct 1 2009, always inject the date as sep 30 2009 in the RunAsDate.

Warning : AVG Antivirus reports that RunAsDate is infected with "Trojan horse Generic 10.Thk". This will not harm ur pc,warning is just bcoz this is a wondow registry hack tool !

                                    DOWNLOAD RUN AS DATE FOR 86X

                                    DOWNLOAD RUN AS DATE FOR 64X

HOW TO IDENTIFY FAKE EMAILS:-

HOW TO IDENTIFY FAKE EMAILS:-

Hello friends, Daily we got almost 100's of face emails ,Like in spam folder. A php script can mail you from any email address...Even from your own email address..So How To Identify the Fake E-mail ID.Here a small guide i am going to share with my all ICA Visitors. If you like the article,then please do a comment..,At present it is difficult to identify the fake ID. With time more and more people are using the fake IDs which creates a bunch of trouble to thousands of people. So here detection of those fake IDs has become almost a necessity. It is also important because hackers are always looking to use the fake email IDs to get the personal information of victims.

There are several techniques to identify the fake e-mail IDs. The common method you can use is to send test mail to those IDs. If you got failure notification then its a fake email IDs. Alternatively there is couple of web service which identify the fake e-mail IDs for the users.

Email Address Checker:
Email Address Checker is well known email IDs checker which identify the the validity of any kind of emails IDs. All you need to do is type the email IDs in the box and press ‘Check’ button. Within a moment it displays the validity of email IDs.


        CLICK HERE 

All About IP -The first step in hacking...

All About IP -The first step in hacking...

In here I have figure out some very easy but cool ways to trace out the geographical location and various other infos like ISP details etc of a remote computer using its IP(Internet Protocol).

Well I guess its one of the most important must learn manual for boys out there if you want to impress your friends particularly gals whom you'll meet online in a chat room and tell them their geographical locations and ISP details and make them surprised and impressed .

In the practical execution of this manual you don't have to work much as it is very simple only you have to use your brain to understand some symbols and some format of expressions and use your IQ to execute things the right way.

What is IP and how to get the IP of a remote system::

Getting the IP or Internet Protocol of a remote system is the most important and the first step of hacking into it. Probably it is the first thing a hacker do to get info for researching on a system. Well IP is a unique number assigned to each computer on a network. It is this unique address which represents the system on the network. Generally the IP of a particular system changes each time you log on to the network by dialing to your ISP and it is assigned to you by your ISP. IP of a system which is always on the network remains generally the same. Generally those kind of systems are most likely to suffer a hacking attack because of its stable IP. Using IP you can even execute system commands on the victim's computer.

Lets take the example of the following IP address: 202.144.49.110 Now the first part, the numbers before the first decimal i.e. 209 is the Network number or the Network Prefix.. This means that it identifies the number of the network in which the host is. The second part i.e. 144 is the Host Number that is it identifies the number of the host within the Network. This means that in the same Network, the network number is same. In order to provide flexibility in the size of the Network, here are different classes of IP addresses:


Address Class Dotted Decimal Notation Ranges

Class A ( /8 Prefixes) 1.xxx.xxx.xxx through 126.xxx.xxx.xxx

Class B ( /16 Prefixes) 128.0.xxx.xxx through 191.255.xxx.xxx

Class C ( /24 Prefixes) 192.0.0.xxx through 223.255.255.xxx

The various classes will be clearer after reading the next few lines.

Each Class A Network Address contains a 8 bit Network Prefix followed by a 24-bit host number. They are considered to be primitive. They are referred to as "/8''s" or just "8's" as they have an 8-bit Network prefix.


In a Class B Network Address there is a 16 bit Network Prefix followed by a 16-bit Host number. It is referred to as "16's".

A class C Network address contains a 24-bit Network Prefix and a 8 bit Host number. It is referred to as

"24's" and is commonly used by most ISP's.

Due to the growing size of the Internet the Network Administrators faced many problems. The Internet routing tables were beginning to grow and now the administrators had to request another network number from the Internet before a new network could be installed at their site. This is where sub-netting came in.

Now if your ISP is a big one and if it provides you with dynamic IP addresses then you will most probably see that whenever you log on to the net, your IP address will have the same first 24 bits and only the last 8 bits will keep changing. This is due to the fact that when sub-netting comes in then the IP Addresses structure becomes:

xxx.xxx.zzz.yyy

where the first 2 parts are Network Prefix numbers and the zzz is the Subnet number and the yyy is the host number. So you are always connected to the same Subnet within the same Network. As a result the first 3 parts will remain the same and only the last part i.e. yyy is variable.

***********************

For Example, if say an ISP xyz is given the IP: 203.98.12.xx Network address then you can be awarded any IP, whose first three fields are 203.98.12. Get it?

So, basically this means that each ISP has a particular range in which to allocate all its subscribers. Or in other words, all subscribers or all people connected to the internet using the same ISP, will have to be in this range. This in effect would mean that all people using the same ISP are likely to have the same first three fields of their IP Addresses.

This means that if you have done a lot of (By this I really mean a lot) of research, then you could figure out which ISP a person is using by simply looking at his IP. The ISP name could then be used to figure out the city and the country of the person. Right? Let me take an example to stress as to how cumbersome but easy (once the research is done) the above method can be.

In my country, say there are three main ISPs:

ISP Name Network Address Allotted

ISP I 203.94.47.xx

ISP II 202.92.12.xx

ISP III 203.91.35.xx

Now, if I get to know the IP of an e-pal of mine, and it reads: 203.91.35.12, then I can pretty easily figure out that he uses ISP III to connect to the internet. Right? You might say that any idiot would be able to do this. Well, yes and no. You see, the above method of finding out the ISP of a person was successful only because we already had the ISP and Network Address Allotted list with us. So, what my point is, that the above method can be successful only after a lot of research and experimentation. And, I do think such research can be helpful sometimes.

Also, this would not work, if you take it all on in larger scale. What if the IP that you have belongs to someone living in a remote igloo in the North Pole? You could not possibly get the Network Addresses of all the ISPs in the world, could you? If yes please send it to me J.

Well now I guess you have pretty good knowledge about what an IP is and what you can do by knowing the IP of a remote system. Now lets come to the point of finding out the IP of remote system.

Well you can easily figure out the IP of a remote system using the netstat utility available in the microsoft's version of DOS. The netstat command shows the connections in which your system is engaged to and the ports they are using. Suppose you are checking your mail in hotmail and you want to find out the IP of msn. All you need to do is to open a dos window (command.com) and type netstat. You will see all the open connections of your system. There you will see something :

Proto Local Address Foreign Address State

TCP RAJ:1031 64.4.xx.xx:80 ESTABLISHED

Now you got the IP address of hotmail ass 64.4.xx.xx .

Similarly you can figure out the IP address of most http or ftp connections.

To know your own IP type the following command in a dos windows

C:\netstat -n

[this commands converts the IP name into IP addresses]

this is what you will probably see on typing the above command :

Proto Local Address Foreign Address State

TCP 203.xx.251.161:1031 194.1.129.227:21 ESTABLISHED

TCP 203.xx.251.161:1043 207.138.41.181:80 FIN_WAIT_2

TCP 203.xx.251.161:1053 203.94.243.71:110 TIME_WAIT

TCP 203.xx.251.161:1058 194.1.129.227:20 TIME_WAIT

TCP 203.xx.251.161:1069 203.94.243.71:110 TIME_WAIT

TCP 203.xx.251.161:1071 194.98.93.244:80 ESTABLISHED

TCP 203.xx.251.161:1078 203.94.243.71:110 TIME_WAIT



Here 203.xx.251.161 is your IP address.

Now lets clarify the format used by netstat :

Proto : It shows the type of protocol the connection with the remote system is using.

Here TCP (transmission control protocol) is the protocol used by my system to connect to other systems.

Local Address :
It shows the local address ie the local IP. When the netstat command is executed without 'n' switch then the name of the local system is displayed and when the netstat is executed with 'n' switch then the IP of the local system is displayed. Here you can also find out the port used by the connection.

xxx.yyy.zzz.aaa:1024

in this format you will see the local address. Here 1024 is the port to which the remote system is connected in your system



Foreign Address ::
It shows the IP address of the remote system to which your system is connected. In this case also if the netstat command is excuted with 'n' switch then you directly get the IP of the victim but if the netstat is executed without 'n' switch then you will get the address of the remote system. Something like



C:\netstat

Proto Local Address Foreign Address State

TCP abhisek:1031 msgr.lw4.gs681.hotmail.com:80 ESTABLISHED

Here msgr.lw4.gs681.hotmail.com is the address of the foreign system . putting this address in any IP lookup program and doing a whois lookup will reveal the IP of the remote system.

Note: The port to which your system is connected can be found from this in the same way as I have shown in the case of local address. The difference is that, this is the port of the remote system to which your computer is connected to.

Below I have produced a list of ports and popular services generally found to be running.

21 :: FTP port

80 :: http port

23 :: Telnet port

Note: If your execute the netstat command and find ports like 12345,27374 are open and are in use then make it sure that your sweat heart computer is infected with her boyfriend.. J J J J I mean your computer is infected with some sort of Trojan.

Below I have produced a list of commonly known Trojans and the ports they use by default. So if you find these ports open then get a good virus buster and get these stupid servers of the Trojans kicked out. Well if you want to play with these Trojan by keeping them in your computer but not letting them ruin your system performance then just disble it from the system registry run and they wont be loaded to memory each time when windows starts up[This trick doesn't work for all Trojans].


Netbus :: 12345(TCP)

Subseven :: 27374(TCP)

Girl Friend :: 21554(TCP)

Back Oriface :: 31337 (UDP)



Well guys and gals I hope you are now well familiar with the term IP and what is the utility of IP in cyber world and how to get the IP of a remote system to which you are connected. I hope you find my writings very easy to undertstand. I know I lack the capacity of explaining myself but I try my level best to make things very easy and clear for you all.



How to get the IP of a remote system while chatting through msn messenger ::



This is a tutorial on how to get IP address from MSN messenger. This is actually
a really easy thing to do. It is not like going through the hard time and reversing
MSN messenger like many people think.

The IP address is only given when you accept or are sending a file through MSN
messenger. When you send IM's, the message is sent through the server thus hiding
your victims IP and your. But when you send a file or recieve a file, it is direct
connection between the two computers.

To obtain the IP accept a file transfer or send a file to the victim, when the file
sending is under way from the dos prompt type "netstat" without the quotation marks.
You should get a table like this:

Proto Local Address Foreign Address State
TCP kick:1033 msgr-ns29.msgr.hotmail.com:1863 ESTABLISHED
TCP kick:1040 msgr-sb36.msgr.hotmail.com:1863 ESTABLISHED
TCP kick: ESTABLISHED

The top name in the list is the server's address for IMing. There could be many of
the second name in the list, as a new connection is made to the server for every
room you are IMing to. You are looking for the address of the remote host in
this table it may be something similar to "host63-7-102-226.ppp.cal.vsnl.com" or “203..64.90.6�.
without the quotation marks.
All you need to do now is to put this address in you IP lookup programe and get the IP of the remote system.

So dudes...I hope this is helpful for you...

BEETEL 450TC1 WIRELESS ADSL 2 + MODEM / ROUTER & 4 LAN

Protocol and Encapsulation: RFC 2364 PPP over ATM AAL5 (PPPoA) RFC 2516-PPP over Ethernet (PPPoE) RFC 1483 LLC & VCMUX (Bridge & Routing mode) RFC 1577 Classical IP over ATM
Network Access: IP routing protocols: statics routing and RIPv1,v2 802.1d transparent bridging TR 69 DHCP Support Firewall Support Multicast proxy support (IGMP Proxy) for video applications
Applications: MULTI NAT NAT QOS Port Triggering Port Mapping NAT Sessions IP Filtering MAC Filtering VPN pass through DNS Proxy Virtual Server,DMZ,PPP Half Bridge SNMP V1, V2 Support
Security: 64, 128, 256 bits WEP encryption, 802.1x, WPA Support SSID hidden , MultiSSID Support USer Isolation, MAC address filtering password protected system managment PAP/CHAP authentication for PPP mode
Wireless LAN Frequency Band: 2412 Mhz - 2462 Mhz (Norths America/FCC);  2412 Mhz- 2472 Mhz (ETSI/Europe); Dynamic rate Scaling from 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s Modulation: OFDM with BPSK, QPSK, 16 QAM, 64QAM, DBPSK, DQPSK,CCK

Wi-Fi

Wi-Fi

The name of a popular wireless networking technology that uses radio waves to provide wireless high-speed Internet and network connections. The Wi-Fi Alliance, the organization that owns the Wi-Fi (registered trademark) term specifically defines Wi-Fi as any "wireless local area network (WLAN) products that are based on the Institute of Electrical and Electronics Engineers' (IEEE) 802.11 standards."

Initially, Wi-Fi was used in place of only the 2.4GHz 802.11b standard, however the Wi-Fi Alliance has expanded the generic use of the Wi-Fi term to include any type of network or WLAN product based on any of the 802.11 standards, including 802.11b, 802.11a, dual-band, and so on, in an attempt to stop confusion about wireless LAN interoperability.

Wi-Fi works with no physical wired connection between sender and receiver by using radio frequency (RF) technology, a frequency within the electromagnetic spectrum associated with radio wave propagation. When an RF current is supplied to an antenna, an electromagnetic field is created that then is able to propagate through space. The cornerstone of any wireless network is an access point (AP). The primary job of an access point is to broadcast a wireless signal  that computers can detect and "tune" into. In order to connect to an access point and join a wireless network, computers and devices must be equipped with wireless network adapters.

Wi-Fi  is supported by many applications and devices including video game consoles, home networks, PDAs, mobile phones, major operating systems, and other types of consumer electronics.  Any products that are tested and approved as "Wi-Fi Certified" (a registered trademark) by the Wi-Fi Alliance are certified as interoperable with each other, even if they are from different manufacturers. For example, a user with a Wi-Fi Certified product can use any brand of access point with any other brand of client hardware that also is also "Wi-Fi Certified". Products that pass this certification are required to carry an identifying seal on their packaging that states "Wi-Fi Certified" and indicates the radio frequency band used (2.5GHz for 802.11b,  802.11g, or 802.11n, and 5GHz for 802.11a).

A common misconception is that the term Wi-Fi is short for "wireless fidelity," however this is not the case. Wi-Fi is simply a trademarked term meaning IEEE 802.11x.